SHERWIN-WILLIAMS CO -- INDUSTRIAL ENAMEL, PURE WHITE  -- 8010-00F007116
<pre>=====================  Product Identification  =====================

Product ID:INDUSTRIAL ENAMEL, PURE WHITE
MSDS Date:02/09/1994
FSC:8010
NIIN:00F007116
=== Responsible Party ===
Company Name:SHERWIN-WILLIAMS CO
Address:101 PROSPECT AVE N W
City:CLEVELAND
State:OH
ZIP:44115-1042
Country:US
Info Phone Num:216-566-2902
Emergency Phone Num:216-566-2917
CAGE:54636
=== Contractor Identification ===
Company Name:SHERWIN-WILLIAMS CO THE
Address:101 PROSPECT AVE NW
Box:City:CLEVELAND
State:OH
ZIP:44115-1042
Country:US
Phone:800-251-2486/216-566-2242
CAGE:54636

=============  Composition/Information on Ingredients  =============

Ingred Name:HYDROTREATED LIGHT PETROLEUM DISTILLATE
CAS:64742-47-8
Fraction by Wt: 40% %
Other REC Limits:NONE RECOMMENDED
OSHA PEL:100 PPM
ACGIH TLV:100 PPM

Ingred Name:TALC (CONTAINING ASBESTOS)
CAS:14807-96-6
RTECS #:MW2700000
Fraction by Wt: 5% %
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.2 FIBERS/CC
ACGIH TLV:0.2 FIBERS/CC; 9394

Ingred Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 15% %
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9394

Ingred Name:VOLATILE ORGANIC CONTENT:  3.60 LBS/GAL
RTECS #:9999999VO

Ingred Name:ETHYLENE GLYCOL, GLYCOL
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: <5%
Other REC Limits:10 MG/CUM
OSHA PEL:50 PPM
ACGIH TLV:C 127 MG/CUM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE IRRITATION OF EYES, SKIN AND
    RESPIRATORY TRACT. MAY CAUSE NERVOUS SYSTEM DEPRESSION. EXTREME
    OVEREXPOSURE MAY RESULT IN UNCONSCIOUSNESS AND POSSIBLY DEATH.
    PROLONGED OVEREXPOSURE MAY CAUSE A DVERSE EFFECTS TO LIVER AND
    URINARY TRACT. REPORTS HAVE ASSOCIATED PROLONGED OVEREXPOSURE WITH
    PERMANENT BRAIN DAMAGE.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
    CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
    CARCINOGENS.
Effects of Overexposure:HEADACHE, DIZZINESS, NAUSEA, LOSS OF
    COORDINATION, REDNESS AND ITCHING OR BURNING SENSATION IN
    EYES/SKIN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP
    WARM AND QUIET. SKIN: WASH AFFECTED AREA THOROUGHLY WITH SOAP AND
    WATER. REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE RE-USE.
    EYES: FLUSH W ITH LARGE AMOUNTS OF WATER FOR 15 MINUTES. GET
    MEDICAL ATTENTION. INGESTION: GET MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:101F,38C
Lower Limits:1.0 %
Upper Limits:6.0%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
    FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
    SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN NOT
    EXPOSED TO EXTREME HEAT. OVEREXPOSURE TO DECOMPOSITION PRODUCTS MAY
    CAUSE A HEALTH HAZARD. SYMPTOMS MAY BE DELAYED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATED AND
    REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT AND OPEN FLAME.
    USE APPROVED BONDING AND GROUNDING PROCEDURES. KEEP CONTAINER
    CLOSSED WHEN NOT IN USE.
Other Precautions:TRANSFER ONLY TO APPROVED CONTAINERS WITH COMPLETE
    AND APPROPRIATE LABELING. DO NOT TAKE INTERNALLY. KEEP OUT OF REACH
    OF CHILDREN. INTENTIONAL MISUES BY DELIBERATELY CONCENTRATING AND
    INHLAING THE CO NTENTS CAN BE HARMFUL OR FATAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF VENTILATION DOES NOT MAINTAIN INHALATION
    EXOSURES BELOW PEL (TLV), USE NIOSH/MSHA APPROVED RESPIRATOR AS PER
    CURRENT 29 CFR 1910.134, INSTRUCTIONS/WARNINGS AND NIOSH RESPIRATOR
    SELECTION.
Ventilation:LOCAL EXHAUST PREFERABLE. GENERAL EXHAUST ACCEPTABLE IF
    EXPOSURE TO MATERIALS IS MAINTAINED BELOW APPLICABLE TLV'S.
Protective Gloves:RECOMMENDED.
Eye Protection:SAFETY SPECTACLES WITH UNPERFORATED SIDE
Other Protective Equipment:WHEN SANDING OR ABRADING THE DRIED FILM,
    WEAR A DUST/MIST RESPIRATOR APPROVED BY NIOSH/MSHA FOR DUST.
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
    AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
USE ONLY WITH ADEQUATE VENTILATION. AVOID BREATHING VAPOR AND SPRAY
    MIST. AVOID CONTACT WITH SKIN AND EYES. SPECIAL PRECUATIONS ARE
    REQQUIRED FOR APPLICATION TO HOT SURFACES.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:300-395F
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:> 1
Spec Gravity:1.06
Evaporation Rate &amp; Reference:< 1  (ETHER=1)
Solubility in Water:NOT GIVEN
Appearance and Odor:WHITE LIQUID, SOLVENT ODOR
Percent Volatiles by Volume:57 %

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT,
    SPARKS, OPEN FLAME
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
    ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
    LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.