DIFCO LABORATORIES INC -- 0601 SODIUM AZIDE -- 6810-00F047750
===================== Product Identification ===================== Product ID:0601 SODIUM AZIDE MSDS Date:02/01/1986 FSC:6810 NIIN:00F047750 === Responsible Party === Company Name:DIFCO LABORATORIES INC Address:920 HENRY ST Box:331058 City:DETROIT State:MI ZIP:48232-2532 Country:US Info Phone Num:313-462-8500/800-521-0851 Emergency Phone Num:313-462-8500/800-521-0851 CAGE:O4487 === Contractor Identification === Company Name:DIFCO LABORATORIES Address:920 HENRY STREET Box:1058-A City:DETROIT State:MI ZIP:48232-2532 Country:US Phone:313-961-0800 CAGE:O4487 Company Name:HARDY DIAGNOSTICS Box:UNKNOW CAGE:0U2A9 ============= Composition/Information on Ingredients ============= Ingred Name:SODIUM AZIDE, AZIDE *96-1* CAS:26628-22-8 RTECS #:VY8050000 Other REC Limits:0.1 PPM ACGIH TLV:C 0.29 MG/CUM EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS ===================== Hazards Identification ===================== Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:EYES/SKIN: WILL CAUSE BURNING. INHALATION: WILL CAUSE HEADACHE, DIZZINESS & FAINTING. Explanation of Carcinogenicity:NONE Effects of Overexposure:EYES/SKIN: WILL CAUSE BURNING. INHALATION: WILL CAUSE HEADACHE, DIZZINESS & FAINTING. ======================= First Aid Measures ======================= First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: FLUSH W/WATER, THEN WASH THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF NEEDED. KEEP WARM & QUIET. INGESTION: IF CONSCIOUS, GIVE LARGE QUANTITIES OF WATER & INDUCE VOMITING IMMEDIATELY BY STICKING FINGER DOWN THROAT. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. OBTAIN MEDICAL ATTENTION IN ALL CASES. ===================== Fire Fighting Measures ===================== Extinguishing Media:WATER, FOAM/DRY CHEMICAL Unusual Fire/Explosion Hazard:A HAZARDOUS DECOMPOSITION PRODUCT IS HYDROGEN AZIDE IT IS VERY EXPLOSIVE. ================== Accidental Release Measures ================== Spill Release Procedures:SMALL: DAMP MOP W/SPONGE, RINSE DOWN DRAIN W/PLENTY OF WATER. LARGE: PICK UP & DISPOSE OF PER WASTE DISPOSAL METHOD. ====================== Handling and Storage ====================== Handling and Storage Precautions:STORE WELL CLOSED AT ROOM TEMP, SEPARATE FROM OTHER CHEMICALS, ESPECIALLY FROM HEAVY METALS & ACIDS. Other Precautions:AVOID DISPOSING OF POWDER THROUGH COPPER/LEAD DRAINS. COPPER & LEAD FORM EXPLOSIVE AZIDES. DON'T INHALE/ALLOW MATERIAL TO CONTACT SKIN/EYES. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:DUST MASK. Ventilation:LOCAL EXHAUST PREFERRED. Protective Gloves:RUBBER Eye Protection:GOGGLES Supplemental Safety and Health ================== Physical/Chemical Properties ================== Spec Gravity:1.846 Solubility in Water:42% Appearance and Odor:WHITE, CRYSTALINE POWDER. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:NO SILVER, LEAD, COPPER FORM EXPLOSIVE SALTS. Stability Condition to Avoid:HEAT, SHOCK Hazardous Decomposition Products:HYDROGEN AZIDE ==================== Disposal Considerations ==================== Waste Disposal Methods:NOTE: THE ORDER IS VERY IMPORTANT. 1) MIX RECOVERED SODIUM AZIDE W/WATER. 2) ADD DILUTED SODIUM NITRATE SOLUTION. 3) ADD DILUTE NITRIC ACID SOLUTION. 4) FLUSH MIXTURE DOWN DRAIN W/PLENTY OF WATER. DIS POSE OF IAW/FEDERAL, STATE & LOCAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.