BLH ELECTRONICS INC -- PERMABOND 910  -- 8040-01-023-7469
<pre>=====================  Product Identification  =====================

Product ID:PERMABOND 910
MSDS Date:05/13/1993
FSC:8040
NIIN:01-023-7469
=== Responsible Party ===
Company Name:BLH ELECTRONICS INC
Address:75 SHAWMUT RD
City:CANTON
State:MA
ZIP:02091-9111
Country:US
Info Phone Num:617-621-2000
Emergency Phone Num:617-621-2000
CAGE:03089
=== Contractor Identification ===
Company Name:BLH ELECTRONICS INC
Address:75 SHAWMUT RD
Box:City:CANTON
State:MA
ZIP:02021-9111
Country:US
Phone:617-821-2000
CAGE:03089

=============  Composition/Information on Ingredients  =============

Ingred Name:ACRYLIC ACID, 2-CYANO-, METHYL ESTER; (METHYL
    2-CYANOACRYLATE)
CAS:137-05-3
RTECS #:AS7000000
Fraction by Wt: 100%
OSHA PEL:2 PPM
ACGIH TLV:2 PPM/4 STEL

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:VAPORS ARE IRRITATING. ACUTE &
    CHRONIC:NONE LISTED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:VAPORS ARE IRRITATING TO MUCOUS
    MEMBRANES AND UPPER RESPIRATORY TRACT.

=======================  First Aid Measures  =======================

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
    SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:FLUSH WITH PLENTY OF
    WATER FOR AT LEAST 15 MINUTES. SKIN:WASH WITH WARM SOAPY WATER.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:167F,75C
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE UP WITH CLOTHES. IMMEDIATELY SOAK CLOTH
    WITH WATER TO POLYMERIZE ADHESIVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL AND DRY PLACE. KEEP AWAY
    FROM HEAT OR OPEN FLAME. USE ADEQUATE VENTILATION.
Other Precautions:EYE BATH AND WASHING FACILITIES SHOULD BE NEARBY.
    AVOID CONTACT WITH SKIN AND EYES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:UNDER NORMAL USE, NOT NEEDED. NIOSH/MSHA
    APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST:RECOMMENDED.
Protective Gloves:POLYETHYLENE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
    SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:118F,48C
Vapor Pres:0.3 @ 68F
Vapor Density:>1
Spec Gravity:1.100 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:TRANSPARENT LIQUID, PUNGENT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
UNCONTROLLABLE RISE IN TEMPERATURE WILL RESULT IN POLYMERIZATION.
Stability Condition to Avoid:HIGH HUMIDITY, HIGH TEMPERATURES ALKALINE
    MINERALS AND THEIR COMBINATIONS.
Hazardous Decomposition Products:CO, CO*2, OXIDES OF NITROGEN AND OTHER
    HYDROCARBONS.
Conditions to Avoid Polymerization:CONTAMINATION OF ADHESIVE WITH
    ALKALINE MINERALS, PEROXIDES OR WATER MAY RESULT IN POLYMERIZATION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE, OR SOLID ADHESIVE CAN BE LAND FILLED
    WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.